JPGPDFPNG?zip

Interconnects

Interconnects are a fundamental part of any system; the connections used between the different pieces of equipment are critical to overall sound quality.

 

 

Cabling is often overlooked as a source for potential upgrade and a way of getting the most of your existing system.

Due to the differences in many manufacturers’ terminations, interconnects come in many different variants including RCA (phono), BNC, DIN or XLR terminations. For information about The Chord Sarum interconnect, please visit the Chord Sarum page.

Because of the sheer number of interconnects we stock here at Cymbiosis, it would not be possible to provide in-depth details about each individual one. Here we have provided information on our two most popular interconnects, but for more advice and information about the full range of interconnect cables we can supply, please contact the shop directly. We will certainly be able to advise you on the absolute best cabling solution for your system and budget.

Chord Company Signature Tuned Aray Interconnect

Chord Company Signature Tuned ARAY Interconnect

The Chord Company Signature Tuned ARAY replaces the Signature Plus and is a completely new design, with all the wonderful timing and coherence that comes from using Tuned ARAY technology – the same unique conductor formation developed for Chord’s flagship Sarum Tuned ARAY interconnects.

Each Signature conductor is built using high quality silver-plated conductors.  Insulation is PTFE and the shielding consists of two layers of high-density silver-plated braid that is effective over a very wide frequency range.  The shielding is covered with a white PTFE precision-applied outer extrusion.

The Signature cable is fitted with Chord’s ultra low mass RCA plugs in which the silver-plated centre pin is set into a PTFE insulation block. A low mass silver-plated shield/return connector is fitted and a PTFE layer applied, before the precision-machined, vibration- damping acrylic plug casing is fitted.  The acrylic plug surrounds are individually machined for Chord by a British company that specialises in high-precision acrylic parts for use in the medical industry.

This total dedication to detail results in a cable of superb quality and capability.

Naim Audio Hi-Line Interconnect

Naim Audio Hi-Line Interconnect

During the development of the Naim CD555 CD Player, a special project ran in parallel to develop a new signal cable that would exceed the performance of Naim’s standard cable.

The brief was to investigate all parameters of a signal carrier, to improve the whole rather than just improve the cable as would be the more normal development practice.

Given the opportunity to start with a ‘clean sheet’, Naim’s R&D team decided to develop a much improved and de-coupled plug as well as a new cable. The results are exceptional when the cable is allowed to hang loose and free. Highly recommended for use with Naim equipment, the Naim Hi-Line is available in the following variants: 5 pin DIN to 5 pin DIN, 4 pin DIN to 5 pin DIN, 5 pin DIN to 2 RCA, 2 RCA to 5 pin DIN and 2 RCA to 2 RCA.

The Naim Hi-Line project ran alongside Naim’s Power-Line mains cable project and both produce exceptional results in comparison to the standard interconnects and power cables. The Naim Hi-Line comes as standard with some of the higher-level Naim equipment.

Linn Silver Interconnect

Linn Silver Analogue Interconnect

Low loss, extensive shielding.

Linn Silver interconnect cable shares the same low capacitance, low loss dielectric of the Black interconnect cable but has much more extensive shielding.

In any environment with electrical noise present, this is a real benefit. The stiffer construction formed by the heavy double-braided shielding makes the cable much more robust and essentially free of microphony.

  • Double layer braided and foil shielding for excellent screening from mains frequencies
  • 50-strand copper conductor
  • Outer diameter 7 mm
  • Available in 1.2 m pairs, terminated with RCA phono connectors